Folding Press Machine
Manufacturer: FASTI
Type: 605
Year of Manufacture: 1989
Controller: OMRON SYSMAC CPM1
Working width max.: 2040 x 1.25
Folding bar cross-section mm: 130
Sheet thickness mm: 1.25
galvanized steel tube
machine fold quality
largest fold length mm: 2040
smallest cross-section mm: 135
mm: 195
Driving speed m/min.: 3
Removed top edge
Folding beam to floor mm: 1400
complete with electrical control and
Two-hand engagement, as well as hydraulic
pivoting of the folding beam,
as well as manual locking of the folding beam
Working diameter max.: 900 mm (1000 mm with egg-shaped tube body)
Projection: 300-400 mm
Profiling stations: standard flat rollers
Sheet thickness max.: 1.25 MM at 400 N/mm2
Motor kW: 2.25 kW
Connection: 400 volts
Dimensions LxWxH: 3300 x 700 x 2220 mm (= incl. attached control)
Reference number: K1798
Description of the program flow
1 Sliding the duct onto the folding beam
2 Swivel the folding beam into the bearing by hand
3 Manual locking of the bearing
4 Actuation of two-hand engagement
4.1 Folding motor runs over the fold with the folding roller
to the adjustable limit switch and
Folding roller recess in the folding bar at the end
4.2 Hydraulic pivoting of the folding beam
5 Removal of the canal by hand
6 Actuation of the two-hand engagement
6.1 Return of the folding motor to the limit switch
and folding roller recess at the end of the folding beam.
Fold length constantly set to 2040 mm